Tristar SZ-1940 Vacuum cleaner
The Tristar SZ-1940 Vacuum Cleaner is fully equipped. This vacuum cleaner does not only have an impressive radius of nine metres, but it is also provided with a HEPA filter H13, telescopic tube and suction controller. This vacuum cleaner scores excellent on energy class, dust pick up and dust re-emission.
AAA performance
The Tristar SZ-1940 Vacuum Cleaner is rated very well on all aspects. The triple A performance is quite unique in this price range. Because of the 700 Watt power and energy class A, the vacuum cleaner has low power consumption and is environmentally friendly. It scores excellent on dust pick up on hard floors. The score on dust pick up on carpet is good (class C). In addition, the dust re-emission is remarkably clean.
Fully equipped
The Tristar SZ-1940 Vacuum Cleaner has all functions that you will need. The suction controller enables you to easily vacuum clean furniture, carpets and curtains. By means of the telescopic tube, you can always set the right height. The power cord is no less than 6.5 metres, which gives you a radius of 9 metres.
HEPA filter H13
This vacuum cleaner is provided with HEPA filter H13. This is a filter system with 8 layers, which stops 99.95% of allergens, for example dust mite and pet hair. This makes the air emission of the vacuum cleaner very clean. This HEPA filter makes this vacuum cleaner suited for people with asthma or allergies.
What’s in the box:
Tristar Vacuum cleaner, high efficiency multi brush, 2x microfibre dust bag: Easy Clean U04, instruction manual
Reasons to choose the Tristar SZ-1940 Vacuum Cleaner:
- Triple A performance: energy class, dust pick up on hard floors and dust re-emission
- Large volume of 3.0 litres
- Impressive radius of 9 metres with a power cord length of 6.5 metres
- Perfect for people with asthma or allergies thanks to the HEPA H13 filter
- Including suction controller and telescopic tube
| Cord storage | Yes |
| Power | 700 |
| Volume | 3 |
| Energy class | A |
| Dust re-emission | A class |
| Noise level | 75 |
| Dust pick up on hard floors | A class |
| Power plug type | C |
| Annual energy consumption | 24 kWh |
| Telescopic tube | Yes |
| Suction controller | Yes |
| Automatic cord rewinder | Yes |
| Dust pick up on carpets | C class |
| High efficiency brush | Yes |
| Speed control | Electronic |
| Rubber wheels | Yes |
| Dust bag/container volume | 3 |
| Tube length | 92 |
| HEPA filter | Yes, H13 |
| Easy clean dust bag(s) included | 2 U4 Microfibre Dust Bag |
| Hose with suction control in the handle | Yes |
| Action radius | 9 |
| EAN Item/Giftbox | 8713016030832 |
| Brand Code | 0 |
How can I clean the HEPA filter in my vacuum cleaner?
How do I clean the blower filter?
You can only clean washable filters with water. Non-washable HEPA blower filters cannot be cleaned and must be replaced every year. Replace a washable blower filter after you have cleaned it four times under the tap or after two years of use without cleaning.
IMPORTANT Never clean the filter with a brush.
The filter cannot be cleaned in a dishwasher. Ensure that the filter is completely dry before putting it back in the appliance.
Cleaning the filter:
Remove the filter from the appliance.
Rinse the folded side of the filter with warm tap water. Do not let the tap flow too hard. Hold the filter with the pleated side up and let the water run along the folds. Keep the filter at an angle so that the water rinses the dirt out of the folds. Rotate the filter 180° and let the water flow in the opposite direction along the folds. Shake the water gently from the filter surface. Let the filter dry for at least 2 hours prior to placing it back in the vacuum cleaner.
NOTE: Cleaning the filter will not give it its original colour back, but its filter capacity will be restored. For optimal dust control and suction you should always replace the filter with an original filter.
